Learn SmartBand
SmartBand reminder


Function
system

Android

IOS

Anti Lost

When the bracelet over a certain distance away from the phone, the phone rings, band shock, disconnect the Bluetooth connection

When the bracelet over a certain distance away from the phone, the phone rings, bracelets shock, disconnect the Bluetooth connection

Enable Band Control music

Mobile music loop control operator interface, you can click a button to play

Mobile music loop control operator interface, you can click a button to play, can not be achieved on a

Enable Band Control camera

Loop control cell phone camera operator interface, according to a phone into the camera, press, mobile phone camera, and you need to run the interface can only be achieved APP

Loop control cell phone camera operator interface, according to a phone into the camera, press, mobile phone camera, and you need to run the interface can only be achieved APP

Incoming Call Notify

Phone calls, ring in hand shake, incoming call alert icon appears, if missed calls, hand ring icon exists until the call records are viewing

 

Temporarily unable to support

SMS Notify

Mobile phone text messages, ring in hand shake, SMS alert icon appears, if the message is not viewed bracelet icon persists until the message is viewed

 

Temporarily unable to support

Vibrate Mode

Turn vibrate mode, call bracelet will vibrate, ring in hand shake icon on the hook.

Default

Enable Band Call phone

Default

Incoming call ring operator phone interface, click the phone call, the phone rings

Tips: The above operations are needed in the bracelet stable Bluetooth connection with your phone case, short press to switch the function interface, long press executable function.

Interactive instructions
The first time you connect the device found:
Click on the Bluetooth icon appears band,                            
Click the plus sign to the right                                    
                     

Band successful connection

                

Data synchronization:
Click on the top right of synchronous
data icon                                  
                       

Start synchronizing data

Set sleeping  mode:
Operator band into the sleep function                            
                     

Short press to switch the sleep switch, you can    
set to sleep mode.

                       
SmartBand charge
Removed band from the wristband

Then insert the USB data line interface side of the band

Tips: Please note the band when you go out wristbands gentle movements, so as not to damage the band and wristbands, after charging is completed, the band mounted buttons needed attention back on the same side together.                             

System Requirements
mobile terminal platform requirements:
The phone supports Bluetooth 4.0 BLE, reference models:
     Samsung Note3, S4, Google Nexus5
     iphone4s, iphone5, iphone5s
Support Android 4.3 and above;
Support iOS 6 and above.
The first phase of temporary support Android phones and the iPhone
Support 720P and 1080P resolution UI, phone dynamic adaptation
Support English \ Simplified Chinese
Support APP version detection and OTA upgrade

 

Frequently Asked Questions
1. How to do when Bluetooth connection is not on? (Connection / reconnection fails or the connection / reconnection is very slow)
Ans: Because the Bluetooth wireless connection signal interference problems, the time may vary for each connection will be, if not on a long connection, you can try the following method after reconnection:
① 15 seconds after turning off Bluetooth, and then restart the Bluetooth;
② restart the phone.;
③. Cancellation bracelet or cancellation account before landing.

2.  When pairing can't search the band? 
A: Because the bracelet Bluetooth radio is not phone search. Make sure that the bracelet is electric, and active, and wristbands are not already connected to the other phone. Then bracelet near the phone, if still valid, please turn off Bluetooth after a certain time interval and then restart.

3.  Bluetooth connectivity has been open to it? Off if there is data?
A: No long pass data front, exercise and sleep data will be kept on hand ring master. When the phone and the Bluetooth connection is successful bracelet, hand ring data is automatically uploaded to the mobile terminal. But wristbands can store about one week of data space is full, the system will automatically overwrite the oldest data. So pay attention to timely upload the data to the SmartBand.
Note: If it is turned reminder feature, you must maintain the Bluetooth is connected.

4. why APP distance, calories value and bracelet on inconsistencies?
A: Because each person's body mechanism, the corresponding data in motion consume calories and is inconsistent, so the user should first set up your personal information to hand ring after synchronization, and then view the motion data.

5.  why not charge the host?
① Make sure the host insertion direction is correct.
② When the host capacity is less than 3.6v, there will be a period of pre-charge battery time.
Note: General plug charger 3 to 5 minutes, can enter the normal state of charge.

6.  charging the screen how to display?
① precharge: When SmartBand battery is completely discharged, the charging, the host needs a few minutes to respond
② Charging: The battery icon on the screen has been moving constantly from one cell to the full grid.
③ full charge: the battery icon has been in full-cell state.

7.  has been wearing a bracelet, Bluetooth radiation will not cause harm to the human body?
A: Bluetooth bracelet radiation values ​​SmartBand much smaller than the American FCC standards, which can be negligible, long-term wear will not cause radiation damage to the human body. Instead, the wristband unique Phiten "water-soluble titanium silicon" material long-term wear can effectively relieve motion fatigue, promote blood circulation.

8.  if there are many times a day to sleep, SmartBand will accumulate record it?
A: Yes, but only recorded sleep data SmartBand day 21:00 to 9:00 the next morning between.

9. abnormal vibration
A: This phenomenon may be due to open the "Mobile Anti-lost" cause false triggering. As the wireless Bluetooth connection signal will be affected by various disturbances, the Bluetooth signal is weak or when disconnected bracelet will vibrate. It is recommended that this feature off when not needed. If prolonged abnormal vibration, consider the ring to be resolved through switch hands.

10.  Bands are waterproof?
A: hand ring sealed waterproof design, waterproof splash, usually in the face and wash your hands when you can normally use, but is not recommended to wear while swimming.